Whirlpool GY397LXU Benutzeranleitung

Seite von 40
15
4. Press the PRESETS 0 number pad.
“MEd” (medium soil level) is displayed.
5. To choose a clean setting other than medium, press the 
PRESETS 0 number pad to scroll through the self-cleaning 
settings.
HVy (heavy soil, 4 hours)
MEd (medium soil, 3 hours)
LITE (light soil, 2 hours)
Choosing the soil level of the oven automatically programs 
the self-cleaning time. 
After 4 seconds, “CLEAN,” and “DELAY,” will light and 
“LOCK” will flash in the display. When the oven door latches, 
“LOCK” will stop flashing and stay lit to show that the oven is 
set for a delayed clean operation. The delay time is displayed.
To change the delay self-clean time:
1. Press DELAY 1 number pad.
“DELAY” and “00:00” will flash in the display.
2. Using the number pads, enter the amount of time you want to 
delay the cycle.
After 4 seconds, “CLEAN,” “DELAY,” and “LOCK” will appear 
in the display to show that the oven is set for a delayed clean 
operation. The delay time is displayed.
When the self-clean cycle starts:
“DELAY” will turn off and the clean time will appear in the display.
When the self-clean cycle ends:
“LOCK” will turn off. The door can then be opened.
To Stop Self-Clean Anytime:
Press CANCEL. All words disappear from the display. All 
functions are canceled. The time of day appears in the display.
Depending on the actual oven temperature when self-clean is 
canceled, the oven door will remain locked until the oven cools.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions 
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire range is cool. These spills may 
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad: Gently clean around the model and serial number plate 
because scrubbing may remove numbers.
All-Purpose Appliance Cleaner Part Number 31682 (not 
included):
See “Assistance or Service” section to order.
STAINLESS STEEL (on some models)
Cleaning Method:
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner and Polish Part Number 31462 (not 
included): See “Assistance or Service” section to order.
Liquid detergent or all-purpose cleaner: Rinse with clean 
water and dry with soft, lint-free cloth.
Vinegar for hard water spots
To avoid damage to stainless steel, do not use soap-filled 
scouring pads, abrasive cleaners, Cooktop Polishing Creme, 
steel-wool pads, gritty washcloths or some paper towels.
CERAMIC GLASS (on some models)
Cleaning Method:
Always wipe with a clean, wet cloth or sponge and dry thoroughly 
to avoid streaking and staining.
Cooktop Cleaner Part Number 31464 is recommended regularly 
to help avoid scratches, pitting and abrasions and to condition 
the cooktop, and can be ordered as an accessory. See 
“Assistance or Service” section to order.
Cooktop Scraper Part Number WA906B is also recommended for 
stubborn soils, and can be ordered as an accessory. See 
“Assistance or Service” section to order. The Cooktop Scraper 
uses razor blades. Store razor blades out of the reach of children.
Light to moderate soil
Paper towels or clean damp sponge:
Clean while the cooktop is still warm. You may want to wear 
oven mitts while cleaning the cooktop.
Sugary spills (jellies, candy, syrup)
Cooktop Scraper: 
Clean while the cooktop is still warm. You may want to wear 
oven mitts while cleaning the cooktop.
Cooktop Polishing Creme and clean damp paper towel: 
Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears.
Heavy soil, dark streaks, specks and discoloration
Cooktop Polishing Creme or nonabrasive cleanser: 
Rub product into soil with a damp paper towel or soft cloth. 
Continue rubbing until white film disappears.
Burned-on soil
Cooktop Cleaner and Cooktop Scraper: 
Rub creme into soil with damp paper towel. Hold scraper as 
flat as possible on surface and scrape. Repeat for stubborn 
spots. Polish entire cooktop with creme and paper towel.
Metal marks from aluminum and copper
Cooktop Cleaner: 
Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears. The marks will not totally 
disappear, but after many cleanings they will become less 
noticeable.
Tiny scratches and abrasions
Cooktop Cleaner: 
Rub creme into surface with a damp paper towel or soft 
cloth. Continue rubbing until white film disappears. Scratches 
and abrasions do not affect cooking performance, and after 
many cleanings they will become less noticeable.
To avoid damage to the cooktop, do not use steel wool, abrasive 
powder cleansers, chlorine bleach, rust remover or ammonia.