Wyse v90le Anleitung Für Quick Setup
Wyse Customer Support
QSG - WSI 1.3.6 v3.doc
Pager 11 of 15
5.
Fill in the fields with appropriate values. WSI uses these parameters to build the
directory structures and filenames.
directory structures and filenames.
Where
Product
Provides a dropdown list of the supported models.
IMPORTANT: For the V30L / V30LE use V32, for the V50L /
V50LE use V52, and for the V90L / V90LE use V92.
V50LE use V52, and for the V90L / V90LE use V92.
Image Version
Refers to the Firmware version and could be a numerical value
such as 559. This value is normally part of the filename you
downloaded from Wyse.
such as 559. This value is normally part of the filename you
downloaded from Wyse.
Flash Size
This parameter is from the amount of Flash memory installed in
your device. You can use this parameter to separate image files if
your environment includes multiple versions of the same device
and you need specific image files for the amount of flash memory
on the devices. Sizes can be 16M, 32M, 192M, 256M, 512M, etc.
your device. You can use this parameter to separate image files if
your environment includes multiple versions of the same device
and you need specific image files for the amount of flash memory
on the devices. Sizes can be 16M, 32M, 192M, 256M, 512M, etc.
Description
For your information. This information will help you identify the
characteristics of the device this image is for. (See figure 6 for an
example).
characteristics of the device this image is for. (See figure 6 for an
example).
Important: Use only “Alpha Numeric” (A through Z, 0 through
9, underscore ( _ ) or spaces.
9, underscore ( _ ) or spaces.
Image File
The name of the file you wish to add. Click on the browse button to
see navigate to the list of available files. This should be the
directory where you unzipped the downloaded image file.
see navigate to the list of available files. This should be the
directory where you unzipped the downloaded image file.
6.
Click on the “Browse” button and select the image file which is already
downloaded/given from Wyse.
downloaded/given from Wyse.
7.
Click “Ok” and wait for the message ‘Image is successfully added”.
Figure 12 - WSI Successful Image Added message
8.
Added image will appear in the firmware list.
9.
Select the firmware and click on “Submit”.