HannsG hb175apb Benutzerhandbuch

 

   

         

 

Figure.1. Installing and Removing the Base 

 
INSTALLATION: 
 
1.  Align the monitor with the opening in the base. 
2.  Note that the longer section of the base points forward. 
3.  Snap the monitor into its base. A clear click sound will affirm that the base is connected 

correctly. 

4.  Verify that the monitor is securely attached to the base by looking at the bottom of the base and 

making sure that the clips are fully engaged in the base. 

 
REMOVAL: 
 
1.  Flip over the monitor so that it is upside down. 
2.  Press the button on the arm that holds the monitor in place. 
3.  Gently pull the base from the monitor until they are unattached. 
 

 
POWER SOURCE: 
 
1.  Make sure that the power cord is the correct type required in your area. 
2.  This LCD monitor has an Internal universal power supply that allows operation with either              

100/120V AC or 220/240V AC voltage areas (No user adjustment is required.) 

3.  Connect one end of the AC-power cord to your LCD monitor’s AC-input socket, and the other       

end to the wall-outlet. 

8