Pentax 3 Benutzerhandbuch

continues to fail in the same way, it is likely that the file itself is 
corrupt and should be replaced with a clean copy of the file. 
 
In rare cases, when the printer is not being flashed, this error may 
indicate bad memory components or other problems that require 
printer service. 
 

 
The Self-Test Feature can be used to print a letter-size page test 
page without connection to a host computer.  The test page (see 
page 34) contains firmware level, image quality, and 
configuration information. 
 

1.  To print a test page, the printer must be turned on and idle, 

and paper must not be loaded in the printer.   

 

2.  Press the main switch for two seconds and release to place the 

printer in “Service Mode”.  The red DATA light will 
illuminate.   

 

3.  Insert a piece of Pentax Quality paper in the printer.  The test 

page will print automatically.  After the print is complete, the 
printer will return to an idle state. 

 

4.  To print multiple pages, repeat steps 1~3. 

 

Note:  Test pages can also be printed from the Windows based 
Configuration Utility provided on the CD. 

 
 
 

 

Page 56