Pentax 600 Betriebsanweisung
- 6 -
Initial Calibration of DSmobileSCAN
……………………
Note: Calibration is critical because it allows the image quality to be “balanced” for
your computer and scanner combination. If you switch the computer that you
use with your scanner or change scanners, you must calibrate again.
use with your scanner or change scanners, you must calibrate again.
1. To open the DSmobileSCAN application, you can either double-click the Adobe PDF
shortcut icon on your desktop
or the “Taskbar tray” icon usually in the
lower right-hand corner of the Windows Desktop.
2. Once you have launched DSmobileSCAN, select the SCAN button and the
step-by-step calibration instructions will appear in a succession of prompts.
This calibration process uses the special black and white calibration sheet that was
included with your scanner (Visit
included with your scanner (Visit
to order additional calibration
sheets and cleaning kits). When calibrating, make sure the page with the black bars is
facing down and note the direction of the arrows for proper insertion. When the
calibration process has been completed successfully, you will see the message above;
otherwise you will need to re-calibrate again.
facing down and note the direction of the arrows for proper insertion. When the
calibration process has been completed successfully, you will see the message above;
otherwise you will need to re-calibrate again.
• If you switch scanners or your image quality has become unsatisfactory, you can
re-calibrate your scanner by choosing the CUSTOM button in the DSmobileSCAN
window and select the Calibrate button.
• If you lose or forget the black and white calibration paper that was included with your
scanner, you can use any plain “White” (the brighter the “White” the better) piece
of letter size (or A4) printer paper to perform the calibration. Simply fold the
paper in half and insert the end opposite the fold into the scanner first when
calibrating. The following message will be displayed (see below).
of letter size (or A4) printer paper to perform the calibration. Simply fold the
paper in half and insert the end opposite the fold into the scanner first when
calibrating. The following message will be displayed (see below).