3com 5500-ei pwr Verweisanleitung
1-17
z
Before setting the security mode to autolearn, you need to use the port-security max-mac-count
command to configure the maximum number of MAC addresses allowed on the port.
z
When a port operates in the autolearn mode, you cannot change the maximum number of MAC
addresses allowed on the port.
z
After setting the security mode to autolearn, you cannot configure static or blackhole MAC
addresses on the port.
z
When the port security mode is not noRestriction, you need to use the undo port-security
port-mode command to change it back to noRestriction before you change the port security
mode to other modes.
On a port configured with a security mode, you cannot do the following:
z
Configure the maximum number of MAC addresses that can be learned.
z
Configure the port as a reflector port for port mirroring.
z
Configure the port as a Fabric port.
z
Configure link aggregation.
Related commands: display port-security.
Examples
# Set the security mode of Ethernet 1/0/1 on the switch to userLogin.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] port-security enable
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] port-security port-mode userlogin
port-security timer autolearn
Syntax
port-security timer autolearn age
undo port-security timer autolearn
View
System view
Parameters
age: Aging time of the security MAC address entries, in the range 1 to 30240 minutes.
Description
Use the port-security timer autolearn command to configure the aging time for the security MAC
address entries that are learned by the port automatically.
Use the undo port-security timer autolearn command to restore the default.
By default, the aging time is 0, that is, the security MAC address entries are not aged.