3com 5500-ei pwr Verweisanleitung
1-2
CLI view
Description
mst-region
MST region view
mtlk-group
Monitor link group view
null
NULL interface view
ospf OSPF
view
ospf-area
OSPF area view
peer-key-code Public
key
editing
view
peer-public-key Public
key
view
pim PIM
view
poe-profile
PoE profile view
qinq QinQ
view
qos-profile
QoS profile view
radius-template RADIUS
scheme
view
remote-ping
Remote-ping test group view
rip RIP
view
route-policy
Routing policy view
shell User
view
smlk-group
Smart link group view
system System
view
user-interface
User interface view
vlan VLAN
view
vlan-interface VLAN interface view
command: Command for which the level is to be set.
Description
Use the command-privilege level command to set the level of a specified command in a
specified view.
Use the undo command-privilege view command to restore the default.
Commands fall into four levels: visit (level 0), monitor (level 1), system (level 2), and
manage (level 3). The administrator can change the level of a command as required. For
example, the administrator can change a command from a higher level to a lower level so
that the lower level users can use the command.
The default levels of commands are described in the following table:
Table 1-2 Default levels of commands
Level
Name
Command
0 Visit
level
Commands used to diagnose network, such as ping,
tracert, and telnet commands.
tracert, and telnet commands.