3com 8807 Verweisanleitung
142
C
HAPTER
10: E
THERNET
P
ORT
C
ONFIGURATION
C
OMMANDS
Use the undo port access vlan command to cancel the access port from the
VLAN.
VLAN.
The condition for using this command is that the VLAN indicated in vlan-id must
exist.
exist.
Example
# Join Ethernet2/1/1 port to VLAN3 (VLAN3 has existed).
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface ethernet2/1/1
[3Com-Ethernet2/1/1] port access vlan 3
port hybrid pvid vlan
Syntax
port hybrid pvid vlan vlan-id
undo port hybrid pvid
View
Ethernet port view
Parameter
vlan-id: VLAN ID defined in IEEE802.1Q, ranging from 1 to 4094 and the default
vlan-id is 1.
vlan-id is 1.
Description
Use the port hybrid pvid vlan command to configure the default VLAN ID of the
local hybrid port.
local hybrid port.
Use the undo port hybrid pvid command to restore the default VLAN ID of the
local hybrid port.
local hybrid port.
The default VLAN ID of local hybrid port shall be consistent with that of the peer
one, otherwise, the packet cannot be properly transmitted.
one, otherwise, the packet cannot be properly transmitted.
Related command: port link-type.
Example
# Configure the default VLAN of the hybrid port Ethernet2/1/1 to 100.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface ethernet2/1/1
[3Com-Ethernet2/1/1] port hybrid pvid vlan 100
port hybrid vlan
Syntax
port hybrid vlan vlan-id-list { tagged | untagged }
undo port hybrid vlan vlan-id-list
View
Ethernet port view