3com 8807 Verweisanleitung
48
C
HAPTER
2: C
OMMANDS
U
SED
TO
L
OG
IN
TO
S
WITCH
[SW8800] user-interface aux 0
[3Com-ui-aux0] flow-control software
free user-interface
Syntax
free user-interface [ type ] number
View
User view
Parameter
type: Specifies the user interface type.
number: Specifies the absolute/relative number of the user interface. Configured
together with the type, it will specify the user interface number of the
corresponding type. If the type is not specified, number will specify an absolute
user interface number.
together with the type, it will specify the user interface number of the
corresponding type. If the type is not specified, number will specify an absolute
user interface number.
Description
Use the free user-interface command to release a specified user interface. The
user interface will be disconnected after the command is executed.
user interface will be disconnected after the command is executed.
Note that the current user interface cannot be release.
Example
# Release user interface 1 after logged in to the switch via user interface 0.
<SW8800> free user-interface 1
After the command is executed, user interface 1 will be disconnected. It will not
be connected to the switch until you log in via the user interface 1 for the next
time.
be connected to the switch until you log in via the user interface 1 for the next
time.
header
Syntax
header [ shell | incoming | login ] text
undo header [ shell | incoming | login ]
View
System view
Parameter
login: Login information in case of authentication. It is displayed before the user is
prompted to enter user name and password.
prompted to enter user name and password.
shell: User conversation established header, the information output after user
conversation has been established. If authentication is required, it is prompted
after the user passes authentication.
conversation has been established. If authentication is required, it is prompted
after the user passes authentication.
incoming: Login header, the information output after a Modem user logs in. If
authentication is required, it is prompted after the user passes authentication. In
this case, no shell information is output.
authentication is required, it is prompted after the user passes authentication. In
this case, no shell information is output.