3com 8807 Verweisanleitung
BGP Configuration Commands
539
undo peer { group-name | peer-address } timer
View
BGP view
Parameter
group-name: Name of peer group.
peer-address: IP address of the peer.
keepalive-interval: Keepalive interval to be specified. The range is 1 to
4294967295. By default, its value is 60 seconds.
4294967295. By default, its value is 60 seconds.
holdtime-interval: Holdtime interval to be specified. The range is 3 to
4294967295. By default, its value is 180 seconds.
4294967295. By default, its value is 180 seconds.
Description
Use the peer timer command to configure the Keepalive and Holdtime intervals
for the specified peer/peer group.
for the specified peer/peer group.
Use the undo peer timer command to restore the default timer settings.
The timer configured by using this command has a higher priority than the one
configured by using the timer command.
configured by using the timer command.
Example
# Configure Keepalive and Holdtime intervals of the peer group "test".
[3Com-bgp] peer test timer keep-alive 60 hold 180
preference
Syntax
preference ebgp-value ibgp-value local-value
undo preference
View
BGP view
Parameter
ebgp-value: Sets preference value for routes learned from external peers.
ibgp-value: Sets preference value for routes learned from internal peers.
local-value: Sets preference value for local-originated routes.
The ebgp-value, ibgp-value and local-value arguments are in the range of 1 to
256. By default, the first two is 256 and the last one is 130.
256. By default, the first two is 256 and the last one is 130.
Description
Use the preference command to configure BGP preference.
Use the undo preference command to restore the default preference.