3com 8807 Verweisanleitung
DHCP Relay Configuration Commands
853
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] dhcp server detect
display dhcp relay
address
Syntax
display dhcp relay address { interface vlan-interface vlan-id | all }
View
Any view
Parameter
vlan-id: VLAN number.
interface vlan-interface: Specifies to display information about the DHCP servers
configured for the VLAN interface.
configured for the VLAN interface.
all: Specifies to display information about the DHCP servers configured for all
VLAN interfaces.
VLAN interfaces.
Description
Use the display dhcp relay address command to display information about
DHCP servers configured for a VLAN interface.
DHCP servers configured for a VLAN interface.
Example
# Display information about DHCP servers configured for all VLAN interfaces.
<SW8800> display dhcp relay address all
** Vlan-interface192 DHCP Relay Address **
Relay Address [0] : 193.193.1.1
Relay Address [1] : 1.1.1.1
# Display information about DHCP servers configured for VLAN interface 192.
<SW8800> display dhcp relay address interface vlan 192
** Vlan-interface192 DHCP Relay Address **
Relay Address [0] : 193.193.1.1
Relay Address [1] : 1.1.1.1
display
dhcprelay-security
Syntax
display dhcprelay-security [ ip-address ]
View
Any view
Parameter
ip-address: User IP address.
Description
Use the display dhcprelay-security command to display information about
specific or all user address entries that the DHCP server maintains.
specific or all user address entries that the DHCP server maintains.