3com 8807 Verweisanleitung
278
C
HAPTER
18: ACL C
ONTROL
C
OMMANDS
TO
C
ONTROL
L
OGIN
U
SERS
write-view: Name of read-write view, ranging from 1 to 32 bytes.
notify-view: Sets notify view.
notify-view: Name of notify view, ranging from 1 to 32 bytes.
acl acl-number: Number identifier of basic number-based ACLs, ranging from
2000 to 2999.
2000 to 2999.
Description
Use the snmp-agent group command to configure a new SNMP group and
reference the ACL to perform ACL control to the network management users by
acl acl-number. Use the undo snmp-agent group command to remove a
specified SNMP group.
reference the ACL to perform ACL control to the network management users by
acl acl-number. Use the undo snmp-agent group command to remove a
specified SNMP group.
Example
# Create a SNMP group "3com", and reference the ACL 2001 to perform ACL
control to the network management users (basic ACL 2001 has already been
defined).
control to the network management users (basic ACL 2001 has already been
defined).
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] snmp-agent group v1 3com acl 2001
snmp-agent usm-user
Syntax
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl acl-number ]
undo snmp-agent usm-user { v1 | v2c } user-name group-name
snmp-agent usm-user v3 user-name group-name [ authentication-mode {
md5 | sha } auth-password ] [ privacy des56 priv-password ] [ acl acl-number ]
md5 | sha } auth-password ] [ privacy des56 priv-password ] [ acl acl-number ]
undo snmp-agent usm-user v3 user-name group-name { local | engineid
engineid-string }
engineid-string }
View
System view
Parameter
v1: V 1 security mode.
v2c: V 2 security mode.
v3: V 3 security mode.
user-name: User name, ranging from 1 to 32 bytes.
group-name: Corresponding group name of the user, ranging from 1 to 32 bytes.
authentication-mode: Specifies the security level to "to be authenticated"
md5: Specifies the authentication protocol as HMAC-MD5-96.
sha: Specifies the authentication protocol as HMAC-SHA-96.