3com 8807 Verweisanleitung
624
C
HAPTER
36: PIM C
ONFIGURATION
C
OMMANDS
display pim interface
Syntax
display pim interface [interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Interface type and interface number, used to
specify the interface.
specify the interface.
Description
Use the display pim interface command to view the PIM interface configuration
information.
information.
If no interface type or interface number is specified, this command displays the
PIM configurations on all interfaces. If the interface type and interface number are
specified, only the PIM configuration on the specified interface is displayed.
PIM configurations on all interfaces. If the interface type and interface number are
specified, only the PIM configuration on the specified interface is displayed.
Example
# Display the PIM configuration information on an interface.
<SW8800> display pim interface vlan 2
PIM information of VLAN-interface 2:
IP address of the interface is 10.10.1.20
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
PIM neighbor hold-time is 105 seconds
PIM neighbor limit is 128
PIM neighbor policy is none
Total 1 PIM neighbor on interface
PIM DR(designated router) is 10.10.1.20
display pim neighbor
Syntax
display pim neighbor [ interface interface-type interface-number ]
View
Any view
Table 88 Description on the fields of the display pim interface command
Field
Description
PIM version
Version of PIM
PIM mode
PIM mode enabled on the interface (DM or SM)
PIM query interval
Hello packet interval
PIM neighbor
hold-time
hold-time
Hold-time of PIM neighbor
PIM neighbor limit
Limit of the PIM neighbors on an interface. No neighbor can be added
any more when the limit is reached
any more when the limit is reached
PIM neighbor policy
Filtering policy of the PIM neighbors on the current interface
PIM DR
Designated router