3com 8807 Betriebsanweisung
108
C
HAPTER
14: L
INK
A
GGREGATION
C
ONFIGURATION
By default, port priority is 32,768.
Displaying and
Debugging Link
Aggregation
Debugging Link
Aggregation
After the above configuration, execute the display command in any view to
display the running of the link aggregation configuration, and to verify the effect
of the configuration.
display the running of the link aggregation configuration, and to verify the effect
of the configuration.
In user view, execute the reset command to clear statistics on the LACP-enabled
port, and the debugging command to enable LACP debugging.
port, and the debugging command to enable LACP debugging.
Link Aggregation
Configuration
Example
Configuration
Example
Network requirements
Switch A connects switch B with three aggregation ports, numbered as
Ethernet2/1/1 to Ethernet2/1/3, so that incoming/outgoing load can be balanced
among the member ports.
Ethernet2/1/1 to Ethernet2/1/3, so that incoming/outgoing load can be balanced
among the member ports.
Table 92 Configuring port priority
Operation
Command
Configure port priority
lacp port-priority port-priority-value
Restore the default port priority
undo lacp port-priority
Table 93 Displaying and debugging link aggregation
Operation
Command
Display summary information of all
aggregation groups
aggregation groups
display link-aggregation summary
Display detailed information of a specific
aggregation group
aggregation group
display link-aggregation verbose [ agg-id ]
Display the local device ID
display lacp system-id
Display detailed link aggregation information
at the port
at the port
display link-aggregation interface
interface-type interface-number [ to
interface-type interface-number ]
interface-type interface-number [ to
interface-type interface-number ]
Clear LACP statistics on the port
reset lacp statistics [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
interface-type interface-number [ to
interface-type interface-number ] ]
Disable/enable LACP state debugging
[ undo ] debugging lacp state [ interface
interface-type interface-number [ to
interface-type interface-number ] ] { {
actor-churn | mux | partner-churn | ptx | rx
}* | all }
interface-type interface-number [ to
interface-type interface-number ] ] { {
actor-churn | mux | partner-churn | ptx | rx
}* | all }
Disable/enable LACP packet debugging
[ undo ] debugging lacp packet [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
interface-type interface-number [ to
interface-type interface-number ] ]
Disable/enable link aggregation error
debugging
debugging
[ undo ] debugging link-aggregation error
Disable/enable link aggregation event
debugging
debugging
[ undo ] debugging link-aggregation
event
event