3com 8807 Betriebsanweisung
Configuring RADIUS Protocol
245
By default, the integer mode is used. That is, the switch supports the RADIUS
server delivering VLAN IDs in integer form.
server delivering VLAN IDs in integer form.
Configuring name of a delivered VLAN
Perform the following configuration in VLAN view.
By default, the delivered VLAN does not have a name.
Configuring RADIUS
Protocol
Protocol
For the 3Com Series Switches, the RADIUS protocol is configured on the per
RADIUS scheme basis. In real networking environment, a RADIUS scheme can be
an independent RADIUS server or a set of primary/secondary RADIUS servers with
the same configuration but two different IP addresses. Accordingly, attributes of
every RADIUS scheme include IP addresses of primary and secondary servers,
shared key and RADIUS server type etc.
RADIUS scheme basis. In real networking environment, a RADIUS scheme can be
an independent RADIUS server or a set of primary/secondary RADIUS servers with
the same configuration but two different IP addresses. Accordingly, attributes of
every RADIUS scheme include IP addresses of primary and secondary servers,
shared key and RADIUS server type etc.
Actually, RADIUS protocol configuration only defines some necessary parameters
using for information interaction between NAS and RADIUS Server. To make these
parameters take effect on an ISP domain, you must configure the ISP domain to
use the RADIUS scheme configured with these parameters in ISP domain view. For
more about the configuration commands, refer to the AAA Configuration section
above.
using for information interaction between NAS and RADIUS Server. To make these
parameters take effect on an ISP domain, you must configure the ISP domain to
use the RADIUS scheme configured with these parameters in ISP domain view. For
more about the configuration commands, refer to the AAA Configuration section
above.
The following sections describe RADIUS protocol configuration tasks.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Table 206 Configure the name of a delivered VLAN
Operation
Command
Configure the name of a delivered VLAN
name string
Remove the configured VLAN name and restore it to the default name
undo name