3com 2226 PLUS Betriebsanweisung
42
C
HAPTER
4: C
ONFIGURING
THE
S
WITCH
4
If a firmware update is available, download the
update files to the admin computer (computer that
you use to access the Web interface).
update files to the admin computer (computer that
you use to access the Web interface).
Installing the Firmware on the Switch
After you finish downloading the upgrade files to the
admin computer, you are ready to perform the firm-
ware upgrade.
admin computer, you are ready to perform the firm-
ware upgrade.
To install the firmware:
1
On the admin computer, start your Web browser, and
then log on to the Switch’s Web interface.
then log on to the Switch’s Web interface.
2
On the menu, click Upgrade. The Upgrade screen
appears.
appears.
3
Click Yes to confirm that you want to upgrade the
firmware.
firmware.
CAUTION: DO NOT interrupt the firmware upgrade
process once it has started.
process once it has started.
The Switch prepares for the upgrade process.
4
Click Continue.
5
Click Browse. A Choose File dialog box appears.
6
Select the upgrade file that you downloaded from the
3Com Web site, and then click Open.
3Com Web site, and then click Open.
7
On the Firmware Upgrade screen, click Upgrade.
The Switch copies the upgrade file on to itself, and
then restarts. A progress bar on the Firmware
Upgrade screen shows the progress of the upgrade.
then restarts. A progress bar on the Firmware
Upgrade screen shows the progress of the upgrade.
When the upgrade process is complete, the message
Firmware Upgrade Success
appears.
8
Click Continue. The Status screen appears.
To verify that the upgrade was successfully com-
pleted, check if the Firmware Version number on the
Status. It should show the version of the firmware
that you have just installed.
pleted, check if the Firmware Version number on the
Status. It should show the version of the firmware
that you have just installed.