3com 2500 Anleitung Für Quick Setup
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
Ethernet Modules
4-13
Cabling the 10BASE-2 (BNC) Module
The 10BASE-2 (BNC) module contains eight
10BASE-2 ports that use BNC connectors. Because
each port is internally terminated, you do not need
to use external terminators when cabling the
module.
10BASE-2 ports that use BNC connectors. Because
each port is internally terminated, you do not need
to use external terminators when cabling the
module.
To cable the 10BASE-2 (BNC) module:
1
Attach the male end of the 10BASE-2 (BNC)
segment to the female BNC connector on the
module.
segment to the female BNC connector on the
module.
Each segment on the module is internally
terminated. When you connect a 10BASE-2 (BNC)
module to your network, the CoreBuilder 2500
system must be an end connection.
terminated. When you connect a 10BASE-2 (BNC)
module to your network, the CoreBuilder 2500
system must be an end connection.
2
Ensure that the opposite end of the 10BASE-2
segment is also terminated.
segment is also terminated.
3
Repeat steps 1 and 2 for the remaining module
ports.
ports.
shows the cabling of the 10BASE-2
(BNC) module using 10BASE-2 cabling.
Figure 4-14 Cabling the 10BASE-2 (BNC) Module
Port Status
Active
Error
1
2
3
4
5
6
7
8
Inserted
PCMCIA
Port Status
2
3
4
5
6
7
8
Active
Error
10BASE-2 (BNC)
module
module
10BASE-2
network segment
network segment
Port 8