3com 2928 Betriebsanweisung
1-4
Task
Remarks
Required
Optional
Allows you to configure that the agent can send SNMP traps
Allows you to configure that the agent can send SNMP traps
to the NMS, and configure information about the target host
of the SNMP traps.
By default, an agent is allowed to send SNMP traps to the
By default, an agent is allowed to send SNMP traps to the
NMS.
Configuring SNMPv3
Perform the tasks in
to configure SNMPv3:
Table 1-2
SNMPv3 configuration task list
Task
Remarks
Required
The SNMP agent function is disabled by default.
The SNMP agent function is disabled by default.
Optional
After creating SNMP views, you can specify an SNMP view for
After creating SNMP views, you can specify an SNMP view for
an SNMP group to limit the MIB objects that can be accessed by
the SNMP group.
Required
After creating an SNMP group, you can add SNMP users to the
After creating an SNMP group, you can add SNMP users to the
group when creating the users. Therefore, you can realize
centralized management of users in the group through the
management of the group.
Required
Before creating an SNMP user, you need to create the SNMP
Before creating an SNMP user, you need to create the SNMP
group to which the user belongs.
Optional
Allows you to configure that the agent can send SNMP traps to
Allows you to configure that the agent can send SNMP traps to
the NMS, and configure information about the target host of the
SNMP traps
By default, an agent is allowed to send SNMP traps to the NMS.
By default, an agent is allowed to send SNMP traps to the NMS.
Enabling SNMP
Select Device > SNMP from the navigation tree to enter the SNMP configuration page, as shown in
. On the upper part of the page, you can select to enable or disable SNMP and configure
parameters such as SNMP version; on the lower part of the page, you can view the SNMP statistics,
which helps you understand the running status of the SNMP after your configuration.
which helps you understand the running status of the SNMP after your configuration.