3com 2928 Betriebsanweisung
1-21
Configuration procedure
1) Configure the IP addresses of the interfaces. (Omitted)
2) Configure the RADIUS scheme system
# Configure the RADIUS authentication server.
2) Configure the RADIUS scheme system
# Configure the RADIUS authentication server.
z
From the navigation tree, select Authentication > RADIUS. The RADIUS server configuration
page appears.
page appears.
Figure 1-24
RADIUS authentication server configuration
Perform the following configurations as shown in
z
Select Authentication Server as the server type.
z
Enter the primary server IP address 10.1.1.1.
z
Enter the primary server UDP port number 1812.
z
Select active as the primary server status.
z
Click Apply.
# Configure the RADIUS accounting server.
Figure 1-25
RADIUS accounting server configuration
Perform the following configurations as shown in
z
Select Accounting Server as the server type.
z
Enter the primary server IP address 10.1.1.2.