3com 3CDSG10PWR Betriebsanweisung

The Trust Setup Page contains information for enabling trust on the 
device.

To enable Trust: 

1 Click Device > QoS > Trust > Setup. The Trust Setup Page opens: 

Figure 83   Trust Setup Page

The Trust Setup Page contains the following fields:

■

Trust Mode — Specifies which packet fields to use for classifying 
packets entering the device. When no rules are defined, the traffic 
containing the predefined packet CoS field is mapped according to 
the relevant trust modes table. Traffic not containing a predefined 
packet field is mapped to "best effort". The possible Trust Mode field 
values are: 

■

CoS — Classifies traffic based on the CoS tag value.

■

DSCP — Classifies traffic based on the DSCP tag value.

2 Define the fields.

3 Click