3com S7906E Installationsanweisungen
1-13
SRPU model
Supported
traffic
forwarding
mode
Feature
Recommended
application
environment
Standard
forwarding
mode with the
route extension
function
forwarding
mode with the
route extension
function
z
Supporting QinQ
z
Powerful Layer 3 forwarding
functions
functions
z
Providing a 32K MAC address
table and a 128K routing table
table and a 128K routing table
Networks having
high requirements on
routing table size
high requirements on
routing table size
Enhanced Layer 2 forwarding does not support route extension.
Configuring SRPU traffic forwarding mode
Follow these steps to configure traffic forwarding mode of LSQ1SRP2XB, LSQ1SRPB, LSQ1MPUA,
LSQ1CGP24TSC, LSQ1CGV24PSC, LSQ1SRPD or LSQ1SRP12GB:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure the traffic forwarding
mode of the SRPU
mode of the SRPU
switch-mode { l2-enhanced |
standard }
standard }
Optional
standard by default.
Restore the default traffic
forwarding mode
forwarding mode
undo switch-mode
Optional
Follow these steps to configure traffic forwarding mode of LSQ1SRP1CB:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure the traffic forwarding
mode of the SRPU
mode of the SRPU
switch-mode { l2-enhanced |
standard-bridging |
standard-routing }
standard-bridging |
standard-routing }
Optional
standard-routing by default
To make the configured forwarding mode take effect, you need to save the configuration and restart the
switch.