3com S7906E Installationsanweisungen

 

1-3 

Figure 1-2 MIB tree 

A

2

6

1

5

2

1

1

2

1

B

 

 

As configurations for SNMPv3 differ substantially from those for SNMPv1 and SNMPv2c, their SNMP 

functionalities are introduced separately as follows. 

Follow these steps to configure SNMPv3: 

Enter system view 

— 

Enable the SNMP agent 

snmp-agent 

Optional 

Disabled by default 

You can enable the SNMP 
agent through this command or 
any command that begin with 
snmp-agent. 

Configure SNMP agent system 
information 

snmp-agent sys-info 
{ contact sys-contact | 
location sys-location | version 
{ all | { v1 | v2c | v3 }* } } 

Optional 

The defaults are as follows: 

3Com Corporation. for contact; 
Marlborough, MA 01752 USA 
for location, and SNMP v3 for 
the version. 

Configure a local engine ID for 
an SNMP entity 

snmp-agent local-engineid 
engineid 

Optional 

Company ID and device ID by 
default. 

Create or update the MIB view 
content for an SNMP agent 

snmp-agent mib-view 
{ excluded | included } 
view-name oid-tree [ mask 
mask-value ] 

Optional 

The MIB view name is 
ViewDefault and OID is 1 by 
default. 

Configure an SNMP agent 
group 

snmp-agent group v3 
group-name [ authentication | 
privacy ] [ read-view 
read-view ] [ write-view 
write-view ] [ notify-view 
notify-view ] [ acl acl-number ] 

Required 

Convert the user-defined plain 
text password to a cipher text 
password 

snmp-agent 
calculate-password 
plain-password mode 
{ 3desmd5 | 3dessha | md5 | 
sha } { local-engineid | 
specified-engineid engineid } 

Optional