3com S7906E Installationsanweisungen

 

1-4 

8 channel8 

Not 

specified 

Receives log, trap, and 
debugging information. 

9 channel9 

Log 

file 

Receives log, trap, and 
debugging information. 

 

Configurations for the seven output destinations function independently and take effect only after the 

information center is enabled. 

 

The system is composed of a variety of protocol modules, board drivers, and configuration modules. 

The system information can be classified, filtered, and output according to source modules. You can 

use the info-center source ? command to view the supported information source modules. 

The default output rules define the source modules allowed to output information on each output 

destination, the output information type, and the output information level as shown in 

indicates that by default and in terms of all modules: 

z 

All log information is allowed to be output to the log file; log information with severity level equal to 

or higher than informational is allowed to be output to the log host; log information with severity 

level equal to or higher than warning is allowed to be output to the console, monitor terminal, and 

log buffer; log information is not allowed to be output to the trap buffer and the SNMP module. 

z 

All trap information is allowed to be output to the console, monitor terminal, log host, and log file; 

trap information with severity level equal to or higher than warning is allowed to be output to the 

trap buffer and SNMP module; trap information is not allowed to be output to the log buffer. 

z 

All debugging information is allowed to be output to the console and monitor terminal; debugging 

information is not allowed to be output to the log host, trap buffer, log buffer, the SNMP module, 

and log file. 

Table 1-3 Default output rules for different output destinations 

Console 

default 
(all 
modules) 

Enabled Warning Enabled Debug  Enabled Debug 

Monitor 
terminal 

default 
(all 
modules) 

Enabled Warning Enabled Debug  Enabled Debug