3com S7906E Installationsanweisungen
1-15
Configuring a UDP Echo Test
A UDP echo test is used to test the connectivity and roundtrip time of a UDP echo packet from the client
to the specified UDP port on the NQA server.
Configuration prerequisites
A UDP echo test requires cooperation between the NQA server and the NQA client. The UDP listening
function needs to be configured on the NQA server before the UDP echo test. For the configuration of
the UDP listening function, refer to
Configuring a UDP echo test
Follow these steps to configure a UDP echo test
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter NQA test group view
nqa entry admin-name
operation-tag
operation-tag
—
Configure the test type as UDP
echo and enter test type view
echo and enter test type view
type udp-echo
Required
Configure the destination
address for a test operation
address for a test operation
destination ip ip-address
Required
By default, no destination IP
address is configured for a test
operation.
address is configured for a test
operation.
The destination address must
be the IP address of the
listening service configured on
the NQA server.
be the IP address of the
listening service configured on
the NQA server.
Configure the destination port
destination port port-number
Required
By default, no destination port
number is configured for a test
operation.
number is configured for a test
operation.
The destination port number
must be the port number of the
listening service configured on
the NQA server.
must be the port number of the
listening service configured on
the NQA server.
Configure the size of probe
packets sent
packets sent
data-size size
Optional
100 bytes by default.
Configure the filler string of a
probe packet sent
probe packet sent
data-fill string
Optional
By default, the filler string of a
probe packet is the
hexadecimal number
00010203040506070809.
probe packet is the
hexadecimal number
00010203040506070809.
Specify a source port number
for a probe request in a test
operation
for a probe request in a test
operation
source port port-number
Optional
By default, no source port
number is specified.
number is specified.