3com S7906E Installationsanweisungen

 

1-30 

# Display results of the last HTTP test. 

[DeviceA] display nqa result admin test

 

  NQA entry(admin admin, tag test) test results: 

    Destination IP address: 10.2.2.2

 

      Send operation times: 1              Receive response times: 1 

      Min/Max/Average round trip time: 64/64/64 

      Square-Sum of round trip time: 4096 

      Last succeeded probe time: 2007-11-22 10:12:47.9 

    Extended results: 

      Packet lost in test: 0% 

      Failures due to timeout: 0 

      Failures due to disconnect: 0 

      Failures due to no connection: 0 

      Failures due to sequence error: 0 

      Failures due to internal error: 0 

      Failures due to other errors:  

      Packet(s) arrived late: 0 

# Display the history of HTTP tests. 

[DeviceA] display nqa history admin test 

  NQA entry(admin admin, tag test) history record(s): 

    Index      Response     Status           Time 

    1          64           Succeeded        2007-11-22 10:12:47.9 

UDP Jitter Test Configuration Example 

Network requirements 

Use the NQA UDP jitter function to test the delay jitter of packet transmission between Device A and 

Device B. 

Figure 1-8 Network diagram for UDP jitter tests 

 

 

Configuration procedure 

1)  Configure Device B 

# Enable the NQA server and configure the listening IP address as 10.2.2.2 and port number as 9000. 

<DeviceB> system-view 

[DeviceB] nqa server enable 

[DeviceB] nqa server udp-echo 10.2.2.2 9000 

2)  Configure Device A 

# Create a UDP jitter test group and configure related test parameters. 

<DeviceA> system-view 

[DeviceA] nqa entry admin test