3com S7906E Installationsanweisungen
1-10
To do…
Use the command…
Remarks
Enter system view
system-view
—
Delete the specified patches
from the memory patch area
from the memory patch area
patch delete patch-number
slot slot-number
slot slot-number
Required
Follow the steps below to delete patches: (distributed IRF device)
To do…
Use the command…
Remarks
Enter system view
system-view
—
Delete the specified patches
from the memory patch area
from the memory patch area
patch delete patch-number
chassis chassis-number slot
slot-number
chassis chassis-number slot
slot-number
Required
Displaying and Maintaining Hotfix
To do…
Use the command…
Remarks
Display the patch information
display patch information
Available in any view
Hotfix Configuration Examples
Hotfix Configuration Example
Network requirements
z
The software running on Device is of some problem and thus hotfixing is needed.
z
The patch files patch_mpu.bin (for the AMB) 、patch_lpr.bin and patch_lpb.bin are saved on the
TFTP server.
z
The IP address of Device is 1.1.1.1/24, and IP address of TFTP Server is 2.2.2.2/24. An available
route exists between Device and TFTP Server.
Figure 1-6 Network diagram of hotfix configuration
Configuration procedure
1) Configure FTP Server. Note that the configuration varies depending on server type and the
configuration procedure is omitted.
z
Enable the TFTP server function.
z
Save the patch files patch_mpu.bin 、patch_lpr.bin and patch_lpb.bin to the directory of the
TFTP server.