3com S7906E Installationsanweisungen
1-19
example, <Sysname-Slave#1/0>. What you have input on the access terminal will be redirected to the
specified global standby SRPU for processing. At present, only the following commands are allowed to
be executed on a global standby SRPU:
z
display
z
quit
z
return
z
system-view
z
debugging
z
terminal debugging
z
terminal trapping
z
terminal logging
You can use the quit command to return to the global active SRPU. At this time, the console of the
global active SRPU is reactivated, and therefore it can output system information and logs; you cannot
use the quit command to return to the global standby SRPU.
Follow these steps to log in to the specified slave device:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Log in to the specified slave
device of an IRF
device of an IRF
irf switch-to chassis
chassis-number slot slot-number
chassis-number slot slot-number
Required
By default, you actually log in
to the master device of an
IRF when you log in to the
IRF.
to the master device of an
IRF when you log in to the
IRF.
An IRF system allows at most nine users to log in at the same time. The permitted login users include
five users logged in through virtual type terminal (VTY) and four users logged in through the console
port.
Displaying and Maintaining IRF
To do…
Use the command…
Remarks
Display related information of
all IRF members
all IRF members
display irf
Available in any view
Display topology information of
the IRF
the IRF
display irf topology
Available in any view
Display the pre-configurations
of all members of the IRF (The
pre-configuration takes effect
after the reboot of the device.)
of all members of the IRF (The
pre-configuration takes effect
after the reboot of the device.)
display irf configuration
Available in any view
Display information about the
MAD detection
MAD detection
display mad [ verbose ]
Available in any view