3com S7906E Installationsanweisungen
1-2
Configuring IPv6 IS-IS Basic Functions
You can implement IPv6 inter-networking through configuring IPv6 IS-IS in IPv6 network environment.
Configuration Prerequisites
Before the configuration, accomplish the following tasks first:
z
Enable IPv6 globally
z
Configure IP addresses for interfaces, and make sure all neighboring nodes are reachable.
z
Enable IS-IS
Configuration Procedure
Follow these steps to configure the basic functions of IPv6 IS-IS:
To do…
Use command to…
Remarks
Enter system view
system-view
––
Enable an IS-IS process and
enter IS-IS view
enter IS-IS view
isis [ process-id ]
Required
Not enabled by default
Configure the network entity
title for the IS-IS process
title for the IS-IS process
network-entity net
Required
Not configured by default
Enable IPv6 for the IS-IS
process
process
ipv6 enable
Required
Disabled by default
Return to system view
quit
––
Enter interface view
interface interface-type
interface-number
interface-number
––
Enable IPv6 for an IS-IS
process on the interface
process on the interface
isis ipv6 enable [ process-id ]
Required
Disabled by default
Configuring IPv6 IS-IS Routing Information Control
Configuration Prerequisites
You need to complete the IPv6 IS-IS basic function configuration before configuring this task.
Configuration Procedure
Follow these steps to configure IPv6 IS-IS routing information control:
To do…
Use command to…
Remarks
Enter system view
system-view
––