3com S7906E Verweisanleitung
1-18
Field
Description
Routing policy configured
Local route policy
display bgp multicast routing-table
Syntax
display bgp multicast routing-table [ ip-address [ { mask | mask-length } [ longer-prefixes ] ] ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Destination IP address.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Description
Use the display bgp multicast routing-table command to display IPv4 MBGP routing information.
Examples
# Display the IPv4 MBGP routing table.
<Sysname> display bgp multicast routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 20.20.20.1 0 200 300i
Table 1-8 display bgp multicast routing-table command output description
Field
Description
Total Number of Routes
Total Number of Routes
BGP Local router ID
BGP local router ID