3com S7906E Verweisanleitung

 

1-44 

# In IPv4 MBGP address family view, set the number of routes that can be received from peer 

131.108.1.1 to 10000.  

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer 131.108.1.1 as-number 100 

[Sysname-bgp] ipv4-family multicast 

[Sysname-bgp-af-mul] peer 131.108.1.1 enable 

[Sysname-bgp-af-mul] peer 131.108.1.1 route-limit 10000 

peer { group-name | ip-address } route-policy route-policy-name { export | import } 

undo peer { group-name | ip-address } route-policy route-policy-name { export | import } 

IPv4 MBGP address family view 

2: System level 

group-name: Peer group name, a string of 1 to 47 characters. 

ip-address: IP address of an IPv4 MBGP peer. 

route-policy-name: Route policy name, a string of 1 to 19 characters. 

export: Applies the route policy to routes advertised to the peer/peer group. 

import: Applies the route policy to routes received from the peer/peer group. 

Use the peer route-policy command to apply a route policy to routes incoming from or outgoing to a 

peer or peer group.  

Use the undo peer route-policy command to remove the configuration. 

By default, no route policy is applied to routes from/to the peer/peer group. 

The peer route-policy command does not apply the if-match interface clause in the referenced route 

policy. Refer to Route policy Commands in the IP Routing Volume for related commands. 

# In IPv4 MBGP address family view, apply the route policy test-policy to routes outgoing to the peer 

group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] group test external 

[Sysname-bgp] peer test as-number 200 

[Sysname-bgp] ipv4-family multicast