3com S7906E Verweisanleitung
1-1
1
IGMP Snooping Configuration Commands
z
Configurations made in IGMP Snooping view are effective for all VLANs, while configurations
made in VLAN view are effective only for ports belonging to the current VLAN. For a given VLAN, a
configuration made in IGMP Snooping view is effective only if the same configuration is not made in
VLAN view.
z
Configurations made in IGMP Snooping view are effective for all ports; configurations made in
Ethernet interface view are effective only for the current port; configurations made in Layer 2
aggregate interface view are effect only for the current interface; configurations made in port group
view are effective only for all the ports in the current port group. For a given port, a configuration
made in IGMP Snooping view is effective only if the same configuration is not made in Ethernet
interface view, Layer 2 aggregate interface view or port group view.
z
An IGMP Snooping configuration made on a Layer 2 aggregate interface is independent of the
same configuration made on its member ports and is not involved in aggregation calculations. The
member ports run the configuration made on the Layer 2 aggregate interface they belong to, and
the configuration made on a member port takes effect only when the port is removed from the
aggregate group.
IGMP Snooping Configuration Commands
display igmp-snooping group
Syntax
display igmp-snooping group [ vlan vlan-id ] [ slot slot-number ] [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan vlan-id: Displays the IGMP Snooping multicast group information in the specified VLAN, where
vlan-id is in the range of 1 to 4094. If you do not specify a VLAN, this command will display the IGMP
Snooping multicast group information in all VLANs.