3com S7906E Verweisanleitung
1-1
1
MLD Configuration Commands
The term “router” in this document refers to a router in a generic sense or a Layer 3 switch running MLD.
MLD Configuration Commands
display mld group
Syntax
display mld group [ ipv6-group-address | interface interface-type interface-number ] [ static |
verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-address: MLD multicast group address, in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number ranging from 0 to
F.
interface interface-type interface-number: Displays the information of MLD multicast groups on the
specified interface.
static: Displays the information of statically joined MLD multicast groups.
verbose: Displays detailed information of MLD multicast groups.
Description
Use the display mld group command to view information of MLD multicast groups.
Note that:
z
If you do not specify an IPv6 mutlicast group address, this command will display the MLD
information of all the multicast groups.
z
If you do not specify interface-type interface-number, this command will display the MLD multicast
group information on all the interfaces.
z
If you do not specify the static keyword, the information of only dynamically joined MLD groups will
be displayed.