3com S7906E Verweisanleitung

 

1-14 

export route-policy route-policy 

VPN instance view 

2: System level 

route-policy: Name of the export routing policy for the VPN instance, a string of 1 to 19 characters. 

Use the export route-policy command to apply an export routing policy to a VPN instance. 

Use the undo export route-policy command to remove the application. 

You can configure an export routing policy when a finer control on the VPN instance routes to be 

redistributed is required, that is, when the control provided by the extended community attribute is not 

enough. An export routing policy may deny routes that are permitted by the export target attribute.  

By default, all VPN instance routes permitted by the export target attribute can be redistributed. 

# Apply export routing policy poly-1 to VPN instance vpn1. 

<Sysname> system-view 

[Sysname] ip vpn-instance vpn1 

[Sysname-vpn-instance-vpn1] export route-policy poly-1 

ext-community-type { domain-id type-code1 | router-id type-code2 | route-type type-code3 } 

undo ext-community-type { domain-id | router-id | route-type } 

OSPF view 

2: System level 

domain-id type-code1: Specifies the type code for the OSPF extended community attribute of Domain 

ID. Valid values are 0x0005, 0x0105, 0x0205, and 0x8005. 

router-id type-code2: Specifies the type code for the OSPF extended community attribute of Router ID. 

Valid values are 0x0107 and 0x8001.