3com S7906E Verweisanleitung
1-31
Default Level
2: System level
Parameters
config: Enables configuration logging.
error: Enables error logging.
state: Enables state logging.
Description
Use the enable command to enable specified OSPF logging.
Use the undo enable command to disable specified OSPF logging.
OSPF logging is disabled by default.
If no keyword is specified, all logging is enabled.
Examples
# Enable OSPF logging.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] enable log
enable out-of-band-resynchronization
Syntax
enable out-of-band-resynchronization
undo enable out-of-band-resynchronization
View
OSPF view
Default Level
2: System level
Parameters
None
Description
Use the enable out-of-band-resynchronization command to enable the OSPF out-of-band
resynchronization (OOB-Resynch) capability.
Use the undo enable out-of-band-resynchronization command to disable the OSPF out-of-band
resynchronization capability.
By default, the capability is disabled.
Examples
# Enable the out-of-band resynchronization capability for OSPF process 1.
<Sysname> system-view