3M SCP716 Betriebsanweisung
17
Operator’s Guide
3M
™
Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
I/O Module Control Panel (optional accessory)
If your projector has the optional I/O Module installed, the projector functions can be operated from the I/O
Module Control Panel.
Module Control Panel.
4
3
5
6
1
2
#
I/O Module Control Panel
Function
1
ON/OFF
Turns the projector on and off
2
Volume +/-
Increases (+) or decreases (-) audio level
3
Source
Switches the displayed input source. Switching order: Computer 1 =>
Computer 2 => S-Video => Video
Computer 2 => S-Video => Video
4
Menu
Displays the projector’s menu system.
5
Arrow Buttons
Navigate up/down or left/right through projector’s Menu system.
6
ENTER
(Center of Arrow buttons)
(Center of Arrow buttons)
Select menu item and confirm menu selections
Top Terminal Panel on I/O Module
Use the Top Terminal Panel to connect the projector to the I/O Module box.
I/O Module
3
1
4
5
2
Audio
Power
Power
USB USB
Control Signal
To Projector
Audio
Out
Out
#
Top Terminal Panel
Function
1
Audio Power
Relay Audio power (from bottom terminal) through to speaker
amplifier.
amplifier.
2
USB (Hub)
Connect two USB devices (like the projector’s remote mouse) to a
single USB port on computer connected to the I/O Module’s bottom
terminal panel.
single USB port on computer connected to the I/O Module’s bottom
terminal panel.
3
CONTROL
Connect IO/Module to projector I/O Module CONTROL terminal.
4
Signal
Connect I/O Module to projector COMPUTER port.
5
Audio Out
Connect IO/Module to external speakers or speakers in 3M Folding
Wall Mount FWMSV2.
Wall Mount FWMSV2.