3M X62w Gebrauchsanleitung

3M™ Multimedia Projector X62w Product Safety Guide

© 3M 2006

1

When using the projector with a wireless LAN please insert the included Wireless Network Card. 

When using a commercial SD Memory card in order to view images insert the SD Memory card in 

the same manner.

And when using a commercial USB MEMORY in order to view images insert the USB MEMORY 

to the AUX I/O port.

See User's Manual - Network Function for information on using either type of card.

Angled corner

SD Card Slot

1. Make sure the projector’s power switch is OFF.

2. Remove the SD card slot cover.
  

  Lift the cover slightly by the small indentation in the 

middle of the front of the cover using a finger nail or 

other means. 

  

  Pull the cover forward and remove it completely from 

the projector.

3.  Insert the SD card. 

      Slowly insert the SD card completely into the SD card 

slot.

      Make sure the angled corner of the SD card is facing 

the right side (AUX I/O port side) of the projector while 

inserting.

4.  Replace the SD card slot cover. 

      Replace the cover by reversing the procedure used 

when removing the cover.

Indentation

AUX I/� Port

To comply with FCC RF exposure compliance requirements, the antenna used for this 

transmitter must be installed to provide a separation distance of at least 20cm from all 

persons and must not be co-located or operating in conjunction with any other antenna or 

transmitter.