4XEM bbpchome Benutzerhandbuch
Hardware Installation
3.7. Installing System Memory
Maximum system memory supported by the motherboard is 2GB.
The motherboard has two DIMM Sockets. Memory can be installed
using 184-pin DDR SDRAM DIMM memory modules. These are no
jumper settings required for the memory size or type, which is
automatically detected by the BIOS.
using 184-pin DDR SDRAM DIMM memory modules. These are no
jumper settings required for the memory size or type, which is
automatically detected by the BIOS.
You must use 2.5V DIMMs in the motherboard. To determine the
DIMM type, check the notches on the DIMMs.
DIMM type, check the notches on the DIMMs.
Install the 184-pin DDR SDRAM modules in any combination as
follows:
follows:
Bank 0 (DIMM1)
64MB/128MB/512MB/1GB
Bank 1 (DIMM2)
64MB/128MB/512MB/1GB
Total System Memory
64MB ~ 2GB
Installing System Memory
31