Xerox 162 Betriebsanweisung

The Xerox DocuMate 162 scanner connects to any available USB port. 
Check your computer’s manual for USB port locations.

1.

Remove any protective tape from the USB cable.

2.

Plug the USB cable into the USB port on the scanner then into a USB 
port on the computer. 

If the plug does not attach easily, make sure that you are plugging it in 
correctly. Do not force the plug into the connection.

3.

Turn on the power switch, located on the back of the scanner to the 
left of the power port.

The status light comes on and flashes indicating that the scanner is 
receiving power. 

If you are using Windows XP or Windows Vista, and have plugged the 
USB cable into a USB 1.1 port, an information bubble may open 
explaining that “A HI-SPEED USB device is plugged into a non-HI-
SPEED USB hub”. Plug the USB cable into a USB 2.0 port (if 
available) or just disregard the message. If you leave it plugged into 
the USB 1.1 port, your scanner may scan a bit slower than the 25 
pages per minute, and 50 images per minute available with a USB 2.0 
port.

Your computer then recognizes that a scanner has been plugged into 
the USB port and automatically loads the appropriate software to run 
the scanner.

USB