Xerox 632 Betriebsanweisung

Choosing Configure Before Scan simply opens a scanning 
interface when you press or click a scan button. You can then use 
the interface to change the Resolution, Scan Mode, and other 
settings. When you scan, the scanned image will still be sent as 
the file type and to the same Destination Application already 
selected in the One Touch Properties window for that button.

1. Open the One Touch Properties window.

2. Using the arrows, choose the button that you want to set to 

configure before scanning.

3. Select the scan configuration Configure Before Scan. 

4. Right-click on Configure Before Scan and choose an interface 

to use for configuring before scanning.

Some interface options may not be available, based on the 
drivers you installed for your scanner.

TWAIN—The TWAIN Interface opens for you to configure the 
scanning. See “Scanning with the TWAIN Interface” on 
page 81.

WIA—The Windows Image Acquisition Interface (WIA) opens 
for you to configure the scanning (available on Windows XP or 
Windows Vista only). See “Scanning with the WIA Interface” on 
page 97.

5. Click OK or Apply on the One Touch Properties window.

Click the arrows to 
select the button.

Select Configure 
Before Scan.

Right-click on 
Configure Before 
Scan to get the menu, 
and choose the 
interface to use for 
configuring.