Xerox 7000AP Betriebsanweisung
DocuColor 7000AP/8000AP System Administration Guide
1-9
1. Tools Mode
To switch
on
a feature, perform the following:
1. From the NVM Read/Write screen, use the keypad on the
Control Panel and enter the
Chain Link Number
:
•
The Chain Link Number for Special Media Setting for
Drilled Papers is
700 545
.
•
The Chain Link Number for Special Media Setting for LEF
Tab Stock is
700 546
.
•
The Chain Link Number for Carbonless Media Enablement
is
700-920
.
NOTE: For the purpose of this procedure, the following
screens show the Chain Link Number, Current Value, and New
Value for Special Media Setting for Drilled Papers. The
Current Value and New Value numbers will vary depending on
the Chain Link Number entered.
screens show the Chain Link Number, Current Value, and New
Value for Special Media Setting for Drilled Papers. The
Current Value and New Value numbers will vary depending on
the Chain Link Number entered.
2. After entering the desired Chain Link Number, press the
Start
button on the Control Panel. The UI displays this screen:
3. To switch
on
a feature, press the appropriate button on the
Control Panel keypad:
•
•
For Special Media Setting for Drilled Papers, press
0
.
•
For Special Media Setting for LEF Tab Stock, press
1
.
•
For Carbonless Media, press
1
.