Xerox 6115MFP Betriebsanweisung

The product is set to a slow printing mode (for 
example, thick stock or transparency).

It takes more time to print with special media. 
When using regular paper, make sure that the 
media type is set properly in the driver.

The product is set to 

 mode.

It takes time for printing to start in power 
saving mode.

The job is very complex.

Wait. No action needed.

The 

 key was pressed.

Make sure no one pressed the 

 key 

while your job was printing.

The tray is empty.

Check that the tray is loaded with media.

A document is printed with an overlay file which has 
been created by a NON-Phaser 6115 driver.

Print the overlay file using a Phaser 6115 
driver.

The power cord is not correctly plugged into the 
outlet.

Turn off the product, confirm that the power 
cord is correctly plugged into the outlet, and 
then turn on the product.

A system error occurred.

Contact your local Xerox service 
representative with the error information.

The product is not level.

Place the product on a flat, hard, level surface.

The tray is not installed correctly.

Remove the tray that you are printing from and 
reinsert it completely into the product.

There is a foreign object stuck inside the product.

Turn off the product and remove the object. If 
you cannot remove it, contact Technical 
Support.