Xerox 3210 Betriebsanweisung

Installing Printer Software in Windows

6

: If your printer is not already connected to the computer, the 

following window will appear.

• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next, and No 

on the following screen. Then the installation will start and a test page 
will not be printed at the end of the installation.

Select the components to be installed and click Next.

: You can change the desired installation folder by clicking 

[

Browse].

After the installation is finished, a window asking you to print a test 
page appears. If you choose to print a test page, select the 
checkbox and click Next.

Otherwise, just click Next and skip to step 9.

If the test page prints out correctly, click Yes.

If not, click No to reprint it.

Click Finish.

When you connect your printer to a network, you must first configure the 
TCP/IP settings for the printer. After you have assigned and verified the 
TCP/IP settings, you are ready to install the software on each computer 
on the network.

You can install the printer software using the typical or custom method.

This is recommended for most users. All components necessary for 
printer operations will be installed.

Make sure that the printer is connected to your network and 
powered on. For details about connecting to the network, see the 
supplied printer’s User’s Guide.

Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window 
appears.

If the installation window does not appear, click Start and then 
Run. Type X:\Setup.exe, replacing “X” with the letter which 
represents your drive and click OK.

If you use Windows Vista, click Start 

→ All programs → 

Accessories 

→ Run, and type X:\Setup.exe.

If the AutoPlay window appears in Windows Vista, click Run 
Setup.exe in Install or run program field, and click Continue in 
the User Account Control window.

Click Install Software.