Xerox 3210 Betriebsanweisung

Installing Printer Software in Windows

9

Select the components to be installed. After selecting the 
components, the following window appears. You can also change 
the printer name, set the printer to be shared on the network, set 
the printer as the default printer, and change the port name of each 
printer. Click Next.

To install this software on a server, select the Setting up this 
printer on a server checkbox.

After the installation is finished, click Finish. If you choose to print a 
test page, select the checkbox.

If the test page prints out correctly, click Yes.

If not, click No to reprint it.

Click Finish.

: After setup is complete, if your printer driver doesn’t work 

properly, reinstall the printer driver. See “Reinstalling Printer Software” 
on page 9.

You can reinstall the software if installation fails.

Start Windows.

From the Start menu select Programs or All Programs 

→ your 

→ Maintenance.

Select Repair and click Next

.

The list of printers available on the network appears. Select the 
printer you want to install from the list and then click Next. 

• If you do not see your printer on the list, click Update to refresh 

the list, or select Add TCP/IP Port to add your printer to the 
network. To add the printer to the network, enter the port name 
and the IP address for the printer.

• To find a shared network printer (UNC Path), select Shared 

Printer [UNC] and enter the shared name manually or find a 
shared printer by clicking the Browse button.

You will see a component list so that you can reinstall any item 
individually.