Xerox 7228 Betriebsanweisung

49 

Configure NetWare Settings using Internet Services 

1.  Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  

Press Enter. 

2. Click 

the 

Tab. 

3.  Click the plus symbol (+) to the left of the Protocol Settings file folder. 

4. Select 

 in the directory tree. 

5.  The available selections include: 

A Host Name (Print Server) Text box.   (Use this name to create the Print Server on the NetWare 
Server.) 

An Active Mode selection box for Directory (NDS) or Bindery. 

A File Server name entry box (Bindery). 

A Polling Interval Entry box for Queue Polling Interval (1 - 1000 seconds). 

A Number of Search Entry box for SAP frequency (1 - 100 seconds, with the ability to set to zero, 
which is off). 

Two Password text boxes for logging into the NetWare Server. 

A TBCP Filter checkbox (displayed when PostScript is enabled).  Click Help for an explanation of the 
use of this feature. 

Under the NDS Subject Label there is a text box for NDS Tree, followed by one for NDS Context. 

A Frame Selection box, with a default of Auto sensing.  Other selections include Ethernet II (used 
when running TCP/IP on your network), Ethernet 802.3 (used for NetWare versions up to 3.11), 
Ethernet 802.2 (the default for NetWare 3.12 and later), and Ethernet SNAP (used on networks 
running TCP/IP and/or AppleTalk). 

A display of the Device's Network (MAC) address. 

A Service Location Protocol (SLP) Active Search Enablement box.  For use with NetWare 5 and 
newer versions, this protocol helps to reduce service advertising network traffic. 

6.  Either accept the default Host (Print Server) Name or type in a new name that matches the name 

used on the Server.