Gestetner 1045 Bedienungsanleitung

Polling Transmission

C Press [Only Once] or [Save] to de-

lete or save the file after trans-
mission.

Note

❒ To delete the original imme-

diately after transmission, se-
lect [Only Once].

❒ To repeatedly send the origi-

nal, select [Save].

Press [OK].
The Transmission Mode menu is
shown. The [Polling TX] key is high-
lighted, and the specified mode is
shown above.

Note

❒ To cancel the Polling Transmis-

sion, press [Cancel]. The Trans-
mission Mode menu is shown.

Press [OK].
The initial display is shown.

Press the

{{{{Start}}}} key.

Polling Transmission Clear
Report

This report allows you to verify
whether Polling Transmission has
taken place.

Limitation

❒ This report is not printed if the

User Parameters are set to allow
the stored originals to be repeated-
ly sent (Save).

Note

❒ This report is turned on by default.

You can turn it off if you wish.

❒ By default, a portion of the sent im-

age is printed on the report. You
can turn this off with the User Pa-
rameters.

User Parameters”(Switch04, Bit7)