Gestetner 10502 Betriebsanweisung
Copying
68
2
To interrupt an original being fed
A
Press the Interrupt key.
The Interrupt key lights up and scanning stops.
The Interrupt key lights up and scanning stops.
B
Remove the originals that were being copied and set the originals you wish
to copy.
to copy.
C
Press the {
Start
} key.
The machine starts making your copies.
D
When your copy job is finished, remove your originals and copies.
E
Press the Interrupt key again.
The Interrupt key indicator goes out.
The Interrupt key indicator goes out.
F
When the display prompts you to, replace the originals that were being
copied before.
copied before.
G
Press the {
Start
} key.
The previous copy job settings will be restored and the machine will continue
copying from where it left off.
copying from where it left off.
To interrupt copying after all originals have been fed
A
Press the Interrupt key.
The Interrupt key lights.
The Interrupt key lights.
Note
❒ Copying will not stop yet.
B
Set your original.
C
Press the {
Start
} key.
The machine stops the original job and starts copying your original.
D
When copying is complete, remove your originals and copies.
E
Press the Interrupt key again.
The Interrupt indicator goes out.
The previous copy job settings will be restored and the machine will continue
copying from where it left off.
The Interrupt indicator goes out.
The previous copy job settings will be restored and the machine will continue
copying from where it left off.