Gestetner c7528 Zusätzliches Handbuch

Paper and Other Media

13

❒ Do not use ink-jet printer paper because it may stick to the fusing unit and

cause a paper misfeed.

❒ When printing on OHP transparencies that have a print side, load them with

the print side over on the bypass tray. Not taking this precaution may cause
them to stick to the fusing unit and cause misfeeds.

❒ Set the paper as described below

• Tray 1, Tray 2: Print side facing up

• Bypass Tray: Print side facing down

• Paper Feed Unit (Option): Print side facing down

❒ Print quality cannot be guaranteed if paper other than the ones recommended

is used. For more information about recommended paper, contact your sales
or service representative.

❒ Do not use paper that has already been printed onto by other printers.

• Paper should always be stored properly. Improperly stored paper might result

in poor print quality, paper misfeeds, or printer damage. Recommendations
are as follows:

• Avoid storing paper in humid areas.

• Avoid exposing paper to direct sunlight.

• Store on a flat surface.

• Keep paper in the package in which the paper came.

Paper thickness

60 - 105 g/m

2

 (16 - 28 lb.)

•

[Normal]: 60 - 90 g/m

2

 (16 - 24 lb.)

•

[MidThick]: 91 - 105 g/m

2

 (24.2 - 28 lb.)