Gestetner c7528 Bedienungsanleitung

Monitoring and Configuring the Printer

243

❖ Help URL Configuration

You can set URLs linked by clicking [Help] or [?] on Web Image Monitor.

❖ Deleting Help URL

Use the “wiconfig” command to make settings for IEEE 802.11b.

❖ View settings

❖ View IEEE 802.11b settings

• If IEEE 802.11b is not working correctly, its information is not displayed.

❖ Configuration

Parameter

Value configured

mode [ap|adhoc|802.11adhoc]

You can set the infrastructure mode (ap) , the 
802.11 Ad hoc mode (802.11 adhoc), or the 
ad hoc mode (adhoc).

The default is ad hoc mode.

ssid ID value

You can make settings for the SSID in the in-
frastructure mode.

Usable characters are ASCII 0x20-0x7e (32 
bytes).

An SSID value is set automatically to the 
nearest access point if no setting is made.

If no setting is made for the ad hoc mode, the 
same value as for the infrastructure mode or 
an ASSID value is automatically set.

channel frequency channel no.

You can enable or disable the WEP function. 
To enable the WEP function, specify [on]; to 
disable it, specify [off].

To start the WEP function, enter the correct 
WEP key.

enc [on|off]

You can enable or disable the WEP function. 
To enable the WEP function, specify [on]; to 
disable it, specify [off].

To start the WEP function, enter the correct 
WEP key.