Gestetner c7528 Bedienungsanleitung

Appendix

321

❒ The IP address acquired from DHCP can be checked on the configuration

page. For information about printing a configuration page, see 

❒ When using WINS server, set the WINS server as shown on 

.

❒ Under the WINS server, host names can be used for remote network printer

ports.

❒ If you are not using the WINS server, reserve the printer's IP address in the

DHCP server so the same IP address is assigned every time.

❒ When there are multiple DHCP servers, make the same reservation for all.

This printer uses information from the DHCP server that responds first.

❒ The DHCP relay-agent is not supported. If you are using the DHCP relay-

agent on an ISDN line network, expensive line charges will be incurred. This
is because your computer connects to the ISDN line whenever a packet is
transferred from the printer.

If the printer IP address is not assigned by a DHCP server automatically, a tem-
porary IP address starting with 169.254, which is not used on the network, can
be automatically selected by the printer.

You must change this setting to “on” to use AutoNet.

See 

.

❒ The DHCP-assigned IP address has priority over that selected by AutoNet.

The printer reboots at this time, and is temporarily unable to print.

❒ You can check the current IP address on the configuration page. For details

about printing a configuration page, see 

❒ When AutoNet is running, the printer name is not registered on the WINS

server.

❒ No communication can take place except between units started up using Au-

toNet. However, communication can take place with Macintosh computers
running Mac OS X 10.2.3 or higher versions.

The printer can be configured to register its NetBIOS name with a WINS server
when the power is turned on. This enables the NetBIOS name of the printer to
be specified from SmartDeviceMonitor for Admin even in a DHCP environment.

This section explains configuring the WINS server.