Gestetner c7528 Bedienungsanleitung

Monitoring and Configuring the Printer

245

Use the “wins” command to configure WINS server settings.

❖ Viewing settings

• If the IP address obtained from DHCP differs from the WINS IP address,

the DHCP address is the valid address.

❖ Configuration

• {on} means “active” and {off} means “inactive”.

• Be sure to specify the interface.

• ip1394 can be specified only when the IEEE 1394 interface is installed.

• wlan can be specified only when the IEEE 802.11b interface is installed.

❖ Address configuration

Use the following command to configure a WINS server IP address:

• Use the “primary” command to configure a primary WINS server IP ad-

dress.

• Use the “secondary” command to configure a secondary WINS server IP

address.

• Do not use “255.255.255.255” as the IP address.

rate [auto|11m|5.5m|2m|1m]

You can set the IEEE 802.11b transmitting 
speed.

The speed you specify here is the speed at 
which data is sent. You can receive data at 
any speed.

auto: automatically set (default)

11m: 11 Mbps fixed

5.5m: 5.5 Mbps fixed

2m: 2 Mbps fixed

1m: 1 Mbps fixed

Interface name

Interface configured

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b interface

Parameter

Value configured